Development and Evaluation of satellite ValidatiOn Tools by Experimenters

The Polarized Imaging Nephelometer (PI-Neph) is an in situ airborne nephelometer developed at the Laboratory of Aerosols, Clouds, and Optics (LACO) at the University of Maryland Baltimore County (UMBC). PI-Neph measures the ambient scattering coefficient and phase matrix of aerosols to validate satellite aerosol observations. It simultaneously measures at 473 nm, 532 nm, and 671 nm wavelengths, with a scattering angle range of 2 to 178 degrees. PI-Neph typically records measurements every 12 or 36 seconds.

The Langley Aerosol Research Group Experiment (LARGE) is an in situ airborne instrument suite that measures aerosol and cloud microphysical and optical properties, such as size distribution, number concentration, and scattering and absorption coefficients. LARGE includes several instruments, such as the Ultra-High Sensitivity Aerosol Spectrometer (UHSAS), Particle-Into-Liquid Sampler (PILS), Particle Soot Absorption Photometer (PSAP), Cloud and Aerosol Spectrometer (CAS), Cloud Imaging Probe (CIP), and additional cloud and aerosol sensors. The LARGE instruments operate over the 450-700 nm wavelength range, detect particles ranging from 0.003 to 20 μm, and measure at a frequency of 1 Hz. It is primarily used for airborne measurements but can also be deployed on ground-based platforms like vehicles.

The Diode Laser Hygrometer (DLH) is an in situ airborne hygrometer developed by NASA’s Langley Research Center (LaRC). It uses tunable diode laser absorption to detect water vapor in the atmosphere. DLH operates in the near-infrared range at about 1.4 μm and has a measurement frequency of 100 Hz. It can deliver precise measurements of water vapor even when flying through clouds.

The Optical Particle Counter (OPC) is an optical device used to measure aerosol particle size and concentration. It determines particle size and concentration by detecting the intensity of scattered light. Most OPCs operate within the visible to near-infrared wavelengths (500-1100 nm) and have a time resolution of 1 second. They are typically used to measure particles larger than 0.5 μm in diameter. OPCs can be used for both airborne and ground-based applications.

The Ultra-High Sensitivity Aerosol Spectrometer (UHSAS) is an in situ spectrometer developed by Droplet Measurement Technologies. It can be used on both airborne and ground-based platforms to measure aerosol size distribution and concentration. UHSAS determines particle size by detecting the peak light signals from aerosol particles illuminated by a 1054 nm laser. It can sample particles in the 60–1000 nm size range and operates at a sampling frequency of 10 Hz.

Nephelometers are in situ optical sensors that can be airborne or ground-based. They measure the total scattering and backscattering of aerosol particles in the atmosphere. Nephelometers operate at three wavelengths: 450 nm, 550 nm, and 700 nm, with a typical time resolution of 1 Hz.

The Aerodynamic Particle Sizer (APS) is an in situ spectrometer manufactured by TSI Instruments. APS measures aerodynamic particles in the 0.5-20 μm size range. It also measures the light-scattering intensity of the particles in the 0.37-20 μm optical size range. APS provides particle size distributions for 52 channels at a typical sampling time of 1 second. It uses a laser diode operating at 655 nm and has a size resolution of 0.02 μm at 1 μm. APS can be deployed on aircraft, ships, or ground-based platforms.

The Particle Soot Absorption Photometer (PSAP) is an in situ airborne photometer manufactured by Radiance Research. It applies Beer's Law to measure the change in light transmission of aerosol particles. These measurements help determine aerosol absorption and extinction. PSAP operates across three wavelengths (467, 530, and 660 nm) and has a 1-second time resolution. It is usually deployed on aircraft, but it can also be used on ships and vehicles.

Condensation Particle Counters (CPCs) are in situ sensors that measure aerosol particle concentrations. CPCs determine aerosol levels by condensing fluid onto particles, causing them to grow to sizes detectable by optical scattering. Typically, CPCs can detect particles ranging from 7 nm to 3 μm, measure concentrations up to 100,000 particles per cubic centimeter, and provide readings every second. CPCs are manufactured by TSI Incorporated and can be used on airborne, shipborne, and ground-based platforms.

The Scanning Mobility Particle Sizer (SMPS) is an in situ aerosol sensor that can be operated on airborne or ground-based platforms, manufactured by TSI Incorporated. SMPS uses a differential mobility analyzer (DMA) to measure the electrical mobility diameter of aerosol particles, which helps determine the size distribution. It also counts the number of aerosol particles using a condensation particle counter (CPC). It detects particles in the size range of 10-1000 nm and typically takes about 10 seconds to complete each scan.